Attendant Features
196
FlexSet 120S/280S User Guide
System Features
System Features
The System Controls menu allows the attendant to program certain features for system-wide operations.
Press
[System]
to access the System Setup Features.
10:50 26 May 2004
site name
user name station number
System
10:50 26 May 2004
site name
user name station
Tk.Set
System
Page 1
System Features - Setup
Alarm
ATT-To
XfrD/N
Day/N1
Day/N2
System Features - Setup
Alarm
Att-To
XfrD/N
Page 2
[Alarm]
Alarm
is used to identify and examine system alarms.
See the
PI & Database Reference Manual
for a detailed list of the alarm codes and their definitions.
1. Press
[Alarm]
.
2. Choose
[Next]
(next alarm) to scroll through the alarm list. The alarm number and its code are listed
on the system lines.
3. Make a list of each alarm number to report to the technician.
4. Press
[Exit]
or
SPKR
to exit.
Alarm message – LED status:
When an
ALARM
DSS key is programmed (default dial number: #1997), the LED status indicates the
following conditions:
Off:
No
alarms
Blinking:
Alarm condition has occurred
Steady On:
Alarm condition remains but has been examined by the attendant.