Station Telephony Features
129
T207M, T208M, T207M/NP, T208M/BL User Guide
Headset Only
Headset Only
The feature is designed for users operating in
Headset
mode. It is of particular value at information centers where the headset
option is the most efficient way of communication. When activated, the Headset Only feature causes calls to be conducted via
the headset and disables the handset and the phone’s microphone and loudspeaker, along with the features that use these
devices, e.g. voice page, etc. Calls are conducted via the headset even if the cradle switch is on-hook, enabling a user to make
full use of the hands-free operation.
NOTES!
When utilizing Headset Only feature:
• The
SPKR
key should be programmed as an ON/OFF (connect/release) key. See your system administrator.
• The phone can be set for
Zip Tone
mode. This mode is used to sound the ring tones directly through the
headset, rather than through the speaker. (For
Zip Tone
setup, see page 249)
• Refer to
for instructions on operating a
phone
programmed as Headset Only.
To activate Headset Only:
•
Press
HEADSET
or
[fSet] [Head]
A bullet appears to the left of
[Head]
and
HEADSET
LED is lit green.
To disable Headset Only:
•
Press the lit
HEADSET
or
[fSet]
•
[Head]
