Station Telephony Features
203
T207M, T208M, T207M/NP, T208M/BL User Guide
Transfer: Broker/Consultation/3-Way Conference Call
Transfer: Consultation
This feature allows you to consult with a third party while the original caller (or called party) is automatically placed on hold.
After the consultation is complete, the two original parties are reconnected and the consulted party is released.
1. During the call, press
[Xfer]
or
XFER
.
2. Dial the third party dial number.
3. When your call is answered, the original party is placed on hold so that you may converse privately with the second
party.
4. After the consultation is concluded, press
[Cslt]
or
[Xfer]
to return to the original call and disconnect from the consulted
party.
NOTE!
If you do not succeed in establishing the Consultation call, your Transfer COS definition may not
be set to use the Consultation Call function. Consult your system administrator for details.
Transfer: 3-Way Conference
During a call you can use this feature to add another party to the call, creating a 3-way Conference call.
1. During the call, press
[Xfer]
or
XFER
.
2. Dial the third party dial number.
3. Wait for the third party to answer.
4. Press
[3Way]
or
CONF
to connect all three parties. If your COS definition is defined as ALL, then you must press
[3Way]
or
CONF
key again to establish the 3-way call;
or
Press
[fRls]
to release the third party and to return to the original call (same as consultation call).
