Phone Overview
12
T207M, T208M, T207M/NP, T208M/BL User Guide
Component Descriptions
Navigator Keys
and
Up/down, right/left arrows used to move from one option to another
on the display. Used for selecting without choosing or activating the option. See
Programmable
Keys (DSS)
Provides a shortcut to a string of dial commands or telephone number, by using a pre-defined key,
known as a DSS (Direct Station Selection) key. Instead of dialing a number or dial commands, this
can be done by pressing the programmed key.
Several dial commands, in a series, may be programmed into one DSS key - useful for one-button
speed dialing, voice response and voice mail system access, and other complex dialing patterns.
There are Four user programmable keys on the T207M, T208M, T207M/NP, and T208M/BL. A green
LED lights when a key is activated. See
Programming: Feature Keys on page 167
Ring and Message
Waiting Lamp
Lamp flashes at a slow rate, indicating that a message is waiting.
Lamp flashes at a faster rate (to the beat of the ring) when the phone is ringing.
Soft keys
Located below the display panel, keys used to directly activate the feature option. See
TEM
Optional expansion module used to add additional programmable buttons to the phone. These
programmable buttons may be configured only from the phone or its web page.
2 x 22 programmable buttons.
Use the shift left and right keys to enable another 22 buttons. See
Volume Key
Adjust the volume (see
)
of the following components:
• Ringer - from idle or while the phone is ringing (see
• Speaker/Handset/Headset - during a conversation (see
Using the Speakerphone or Headset on
Component
Description
