Setup
244
T207M, T208M, T207M/NP, T208M/BL User Guide
Coral Telephony Features
To select priorities:
1. Select the required destinations by pressing the programmed DSS keys.
You can program a maximum of six priorities in any order:
•
OUTSIDE Line
: trunk/trunk group/dial service or routing access
•
LOOP
(default access code #121)
•
LOOP Originating Only
(default access code #125)
•
Boss
Group
Line
Key
•
ELA
Line
Key
2. Press
[Set]
or dial the activation code
9
3. Listen for the confirmation tone.
NOTES!
• If you intend to select an OUTSIDE line as the first priority, you must program a
LOOP
or
LINE
key to be able to
dial internal numbers. When activating a feature, press
LOOP
or
LINE
first, then dial the required number.
• This feature is useful if you make mostly trunk (external) calls. Assign a preference to an outside line(s), and each
time you make a call, you will be connected directly to an external trunk.
[Lib]
Private Library
is used to program your personal Speed Dial Directory. A Private Library can be used to
speed dial long numbers. Also, you can use a Private Library to dial external or network numbers for features
that allow only internal destinations such as Call Forward, Divert and Hunt features.
For a full explanation of this feature, see
Speed Dialing: Private Library on page 191
.
[Safe]
Security Line
is used to block another user from employing the Break In feature on your phone extension.
All Call Waiting and Break In feature tones are blocked. When activated, a caller attempting to break in to
your station will receive a reorder tone. Only a station that has Security override privilege can break into your
secured phone.
Press the
[Safe]
toggle switch to activate, and again to deactivate. A bullet is displayed next to
[Safe]
to indicate
when the feature is activated.
