Operating the Phone
33
T207M, T208M, T207M/NP, T208M/BL User Guide
Making Internal Calls
Upon Hearing Reorder Tone
After dialing an internal station that is idle, but has been set to Do Not Disturb or
UNATTEND
, the following features are
available. After dialing a station and receiving a reorder tone, override can be applied by pressing
[oDND]
.
[Camp]
Camp On
, also known as
Call Back
. Use this feature to have the system automatically call you back when
the DND destination station becomes available.
See
Camp On (Call Back) on page 84
.
[2Rng]
Not used during reorder tone.
[VPg]
Voice Page
the called party’s keyset station using this feature. Your call is automatically answered and your
voice heard over the called party’s speakerphone after the Voice Page tone stops. See
.
[Mute]
or
MUTE
Mute
can be activated during reorder tone so that when the Do Not Disturb is overridden, your side of the
conversation is muted and the called party will not hear anything. When this feature is activated by the
[Mute]
or
MUTE
on/off toggle switch, a bullet appears to the left of
[Mute]
and
MUTE
LED is lit red. The mute feature
deactivates the microphone for your speakerphone and handset or headset. Press the toggle key again to
reactivate the microphone. See
.
[Msg.]
or
MSG
Leave Message
. Use this feature to leave a “message” at the called party’s station. This feature lights the
message waiting lamp at the called party’s station indicating that a message was left, and it leaves a simple
message such as
CALL SUSAN
on the destination station’s display. See
[BrkI]
Break In
operates as
[oDND]
.
[oDND]
DND Override
enables an authorized user to send a ring tone thus overriding the Do Not Disturb status.
When you hear the reorder tone, if
DON’T DIST
or
UNATTENDED
message appears, override can be
applied and your call can be put through to the station. See
Do Not Disturb Override on page 102
.
DONT DIST
called number or name
↓→
Msg.
Camp
BrkI
2Rng
