Station Telephony Features
65
T207M, T208M, T207M/NP, T208M/BL User Guide
Auto Set Relocate: Permanent
Auto Set Relocate: Permanent
When defined for permanent relocation, this feature enables you to swap phones within the same Coral system by assigning
one phone the profile of the other phone, and vice versa. All the phones' properties, numbering, programmable keys,
membership in groups, etc. are automatically exchanged. This feature facilitates the phone relocation procedure, eliminating
the need for traditional phone moves that involve physical disconnection of the station wires and reconnection at another
location. Both source and destination phones (see figure below) should be T207M, T208M, T207M/NP, and T208M/BL
phones. The Auto Set Relocate is activated at the destination station. The phone swap holds until a reverse swap is performed.
Activating from the Destination (new) location
1. Select
[fSet] [Move]
or
[ACD] [Move]
.
2. Dial your (source) station number.
3. Enter your (source) passcode (four digits).
4. Dial the activation code
9
.
5. The station now initializes with the source profile.
Reversing from the Source (original)
location
Repeat the above procedure from your original source location.
Destination
Station
- Dial Number
- Keyset Definition
- COS
- Programmable keys
- Private Library
- Message indication
- Group membership
- Personal Directory
Source
Station
(Passcode)
Swapping:
1. Auto Set Relocate
activation from the
Destination station
2. Source station's
passcode to be
entered
