Station Telephony Features
104
T207M, T208M, T207M/NP, T208M/BL User Guide
ELA Group Line Keys: Programming
ELA Group Line Keys: Programming
Each phone in an ELA Group can be programmed with up to 32 ELA line keys. To learn about the different uses of ELA line
keys, see
NOTE!
In order for ELA calls to be received on the main ELA station, the station must be defined as multi-
appearance and be a member of an ELA group. You may belong to more than one ELA group.
To Program ELA Line Keys:
1. Press
[fSet]
[Prog]
.
2. Press the DSS key you want to program as the ELA line key.
3. Dial the ELA LINE feature code (default: #17718).
4. Dial the ELA Group number (main ELA station extension number).
5. Continue to enter the Ring State (see
6. Enter the line key number (00 to 31). Two digits must be entered.
7. Press the selected DSS key again.
8. Press
SPKR
to release.
ELA: Defining the ELA Line Keys Ring State
Only one type of ring state may be defined on your station. (If your station is member of more than one ELA group, you can
define different ring states for each ELA group).
Although you are prompted to set the ring state each time when programming individual ELA line key (see
), you can
use this feature to override any previous ring state definition and set one ring state for all the ELA line keys. Note that the last
ring state defined (whether using this ELA feature or when programming an ELA line key) will apply to all the ELA line
keys.
NOTE!
Regardless of the ring state defined for your station, the line key flashes for all incoming ELA
Group calls and remains lit for the duration of the call.
