Station Telephony Features
125
T207M, T208M, T207M/NP, T208M/BL User Guide
Group Calls: Submitting Request to Speak
Group Calls: Submitting Request to Speak
Members may be permitted to participate in a Group Call with the ability to speak and hear each other, or in the
Mute
mode.
In case of a muted conference only a Group Call initiator has the right to speak. The user defined as
Group Operator
can set
his own station to the audible mode, while connected to the conference, and may grant the right to speak to other participants.
This feature allows you to request permission to speak from the
Group Operator
. The request is submitted while your current
conference is in progress, without disturbing it.
Sending a request to speak to the group operator:
1. Press the
Speech Request
DSS key or
[Xfer]
.
(To program a Speech Request key, use Help feature access code #1443,
followed by the Group Operator dial number.)
2. Continue attending the current conference, while watching the
Speech Request
key LED and the second line of the
display.
3. The
TRX. ON
message indicates that you are given permission to speak.
4. The
TRX. OFF
message indicates that the permission to speak is taken away from you.
