Station Telephony Features
142
T207M, T208M, T207M/NP, T208M/BL User Guide
Messages: Options
Leaving a message at another system station from idle when message list empty:
1. Press
[Msg.]
or
MSG
.
2. Press
[Dest]
or
[LveMsg]
and dial a station, boss group or network number.
3. Listen for the confirmation tone.
You will hear a reorder tone when trying to leave a message at stations not equipped with a flashing message lamp.
When your phone rings (message delivery):
1. Answer the call and check the station number displayed.
2. Deliver the relevant message.
NOTE!
A message left at a Boss Group turns ON the message lamp of the first Boss Group member only.
[xMsg]
Message Cancel
allows you to cancel a message that you left at another station.
1. Press
[xMsg]
.
2. Dial the station, boss group or network number at which you left a message.
3. Listen for the confirmation tone.
[MsgW]
Message Waiting
.
The Attendant can use this feature to leave a message waiting indication at a busy or idle
station, room or group.
Leaving a message indication at an idle station:
1. Press
[MsgW]
(Message Waiting).
2. Choose
[sRmG]
and dial a station/room/group number, or scrollf through the list using
.
3. Choose
[Set]
to assign or
[Canc]
to deassign message.
4. Press
SPKR
or
[Exit]
to exit.
NOTE!
A message left at a Boss Group activates the message lamp of the first member of that Boss
Group only.
