Station Telephony Features
180
T207M, T208M, T207M/NP, T208M/BL User Guide
Redial
Activating Auto Redial from idle (before making an external call):
1. Press
[ARdl]
.
2. Dial the required outside line access code or press the relevant preprogrammed outside line key.
Possible outside line access codes are
trunk number, trunk group number, routing access, dial service, private/public
library number, last number redial code, or saved number code
.
3. Dial the outside number.
4. Press
[Enbl]
.
The number will now automatically redial at timed intervals. When the called party answers, press the flashing
SPKR
key
or lift the handset to enable conversation.
Once Auto Redial has been activated, the following options appear in idle state after pressing
[ARdl]
. The features in the
following table affect all numbers in the redial list.
Press
[Next]
and
[Prev]
to scroll through the redial list. When the required number is found the Auto Redial features (see table
below) can be directly activated for the selected number. Press
SPKR
to exit.
To
Press
Display Message
Feature
Key LED
Comments
Cancel
[CanA]
AUTO REDIAL /
LIST EMPTY
Off
Deletes all numbers in the redial list. A
confirmation tone is heard.
Freeze
[FrzA]
HOLD SET
Flashing
Ceases all automatic dialing. Confirmation tone is
heard.
Restart
(release from
freeze)
[RstA]
/
SPKR
HOLD REMOVED
On
Re-enables dialing of the "Frozen" numbers.
Add
[Add]
On
Adds another external number to the redial list.
