Attendant Features
217
T207M, T208M, T207M/NP, T208M/BL User Guide
Malicious Call Trace
Malicious Call Trace
The Attendant may initiate this feature that records the next
x
(a system-defined variable) calls to any station or room. A list
of the calls can also be sent to a printer or terminal. Press
[aTrc]
to access the Attendant Malicious Call Trace options.
[V/X]
Malicious Call Trace On/Off
toggles the Malicious Call Trace on or off.
1. Press
[V/X]
.
NOTE!
If the system resources are insufficient for the feature to be available, the message
NO TRACE RECORD
appears.
2. Choose
[SRm#]
and dial a station/room number, or scroll through the list using
.
3. To start call trace, choose
[Set]
. To stop call trace, choose
[Canc]
.
[Prnt]
Malicious Call Trace Print
sends a list of the calls to a terminal or printer. Malicious Call Trace must
previously be activated (
see On/Off above
), or the message
CALL TRACE OFF
will appear and the action
will not be completed.
1. Press
[Prnt]
.
2. Choose
[SRm#]
and dial a station/room number, or scroll through the list using
[Next]
and
[Prev]
only.
3. Choose
[Set]
to print. The message
CALL TRACE PRINT
appears.
Page 1
10:50
26 May 2007 Company xyz
user name
station number
→
[aTrc]
Room
aRS
bFwd
Page 2
Attendant: Call Trace
→
On/Off
Prnt
