Operating the Phone
31
T207M, T208M, T207M/NP, T208M/BL User Guide
Making Internal Calls
Making Internal Calls
Upon Hearing Ringback Tone
After dialing an internal destination number, the following features appear on your phone display when you hear a ringback
tone. Wait for answer or press the nearby soft key to activate the required feature.
See
NOTE!
A message indicating the called party’s status (or other relevant information) may appear on the
second line of the display until you answer the call
.
[Msg.]
or
MSG
Leave Message
. If no one answers your call, use this feature to leave a “message” at the called party’s
station. This feature lights the message waiting lamp at the called party’s station indicating that a message
was left, and it leaves a simple message such as
CALL SUSAN
on the destination station’s keyset display.
See
[MsgW]
Message Waiting
.
The Attendant can use this feature to leave a message waiting indication at a busy or idle
station, room or group. See
Leaving a message indication at a busy or non-answering station: on page 143
[Camp]
Camp On
, also known as
Call Back
.
When a station does not answer, you may request that the system
automatically call you back when the required destination number is available. See
[VPg]
Voice Page
the called party’s keyset station using this feature. Your call is automatically answered and your
voice heard over the called party’s speakerphone. See
Paging: Voice Paging on page 161
.
INTERNAL
called number or name
↓→
Msg.
Camp
VPg
Mute
