Station Telephony Features
64
T207M, T208M, T207M/NP, T208M/BL User Guide
Auto Set Relocate
Auto Set Relocate
Auto Set Relocate enables you to transfer your station and all your station’s predefined features to a new location, thus sparing
you the inconvenience of having to re-enter all the stored speed numbers and to reset previously defined features at your new
permanent or temporary location. This feature enables you to use any phone available from your Coral system while keeping
your unique extension dial number. Phones are defined to have either the Permanent (see
or Temporary
(
see
Auto Set Relocate feature enabled. Before activating this feature, contact your system administrator to determine
what your Auto Set Relocate setting is. If you are defined as permanent, you will not be able to use temporary (unless
redefined by your system administrator), and vice versa.
NOTE!
When invoking the Auto Set Relocate feature, incorrect information may be sent to the local
Emergency or E911 Center. Before activating this feature, contact your local administrator to
ensure that your new and current system profiles are compatible with the E911 Center.
Auto Set Relocate is accessed by selecting
[fSet] [Move]
from the idle screen.
.
Page 1
10:50
26 May 2007 Company xyz
user name
station number
↑→
COS
[fSet]
Trc
Room
Page 2
Feature Setup
↑→
wDND
Priv
eHld
[Move]
Page 3
RELOCATE
ENTER SOURCE NO.
