Programmable Buttons (Line and Memory Keys)
208 T328 Executive IP Phone User Guide (Coral IPx/FlexiCom)
Programmable Buttons (Line and Memory Keys)
To program a programmable button as a BLF key (Memory Key only):
1. Press
[Menu]
or, if this is an expansion key, press the relevant button for about five seconds and skip to Step 4.
2. Use the navigator keys to scroll to Memory Keys as DSS Keys Type (
2. Features
->
3. DSS Keys
->
2. Memory Keys
as DSS Keys)
and press
OK
or
[Enter]
.
3. Use the up/down navigator keys to select the button to be programmed and press
OK
or
[Enter]
to select (see figure on
page 200
for button numbers):
- Memory Key 1 corresponds to programmable memory key labeled
1
.
- Memory Key 2 corresponds to programmable memory key labeled
2
.
- Memory Key 3 corresponds to programmable memory key labeled
3
.
- Memory Key 4 corresponds to programmable memory key labeled
4
.
- Memory Key 5 corresponds to programmable memory key labeled
5
.
- Memory Key 6 corresponds to programmable memory key labeled
6
.
- Memory Key 7 corresponds to programmable memory key labeled
7
.
- Memory Key 8 corresponds to programmable memory key labeled
8
.
- Memory Key 9 corresponds to programmable memory key labeled
9
.
- Memory Key 10 corresponds to programmable memory key labeled
10
.
4. Use
[Switch]
or the right/left navigator keys to select
BLF
.
5. Use the down navigator key to select
Line ID:
.
6. Use
[Switch]
or the right/left navigator keys to select the account number you want to associate with this button.
7. Enter the pickup number from the dial pad. Use
[Del]
to delete.
8. Press
OK
or
[Save]
to save your changes.
