SPARCbook Portable Workstation User Guide
6-3
Using the Removable Hard Disk
Fitting and Removing the Hard Disk
Fitting and Removing the Hard Disk
Your SPARCbook is shipped from the factory with the hard disk
already fitted and ready for you to use. The disk can be removed as
follows:
Caution
Ensure that your SPARCbook is powered OFF before removing the hard disk.
Removing the hard disk while your SPARCbook is running may damage the
disk and destroy important data.
1.
Place your SPARCbook on a firm surface, such as a desk, with
its left side tilted upwards slightly.
2.
Slide the hard disk’s catch downwards, as shown in Figure 6-1.
3.
Pull on the catch to remove the disk from your SPARCbook.
Figure 6-1 Removing the Hard Disk
Catch / Cover
S3UG4_Book Page 3 Friday, August 8, 1997 11:37 am