TAGHeuer Timing
Page 7 / 20
2.4. STOPWATCH mode
This timing mode allows the timekeeper to make a Start/Finish, with
intermediate time (
SPLIT
) and lap time (
LAP
) with a 1/100th of a second
precision
1.
Number of split / Memory status
2.
Running status
3.
Split time
4.
Lap Time
5.
Running time
The time displayed is up to 59’59.99’’ (1 hour)
SPLIT
: Intermediate time, or cumulated time taken at each time (
SPLIT/LAP
button)
The SPLIT Time is to the top of the LCD (mm:ss.dc)
LAP
:
Lap time or time difference between time taken (
SPLIT/LAP
button)
The LAP time display is in the middle of the LCD (mm: ss.dc)
Running Time
: Running time between Start and Finish
The running time is on the bottom of the LCD (mm:ss.dc)
The running time always starts from
00:00:00
.
-
To start, press the
START/STOP
button (
icon is ON)
-
Three times are running and displayed
-
At Split / Lap, press
SPLIT/LAP
Button.
The
SPLIT
and
LAP
time is stopped. The running time (bottom) continues to run.
At each press of the
SPLIT/LAP
button, the counter store increments.
It is possible to recall and view the running time (after
SPLIT/LAP
) by pressing
MEMORY
button.
For simple viewing in this mode, it is possible to reduce the information, and display
only
SPLIT
or
LAP
. For this, during the race, press the button
MODE
.
