welcome
12
mixed technology construction
With surface mount components for fast
digital signal transfer and leaded
components for perfect audio signals, the
T32R incorporates mixed technology
construction in one PCB to optimize
performance.
multi-layer pcb
The T32R’s glass epoxy multi-layer
printed circuit boards control the
complex pattern of return currents,
provide controlled impedances and
minimize coupling better than a
conventional circuit board could ever do.
Power distribution is optimized through
the use of very low impedance solid
planes. To minimize crosstalk and noise,
the ground planes are split along the
boundaries between the analog and digital
processing circuits.
vibration damping
Both the cover and baseplate are bonded with
viscoelastic laminate to provide a low Q panel
with rapid absorption of externally induced
vibrations.
mounting feet
The proprietary feet provide both suspension
compliance and controlled damping. The
outer shell carries a polyurethane disk which
protects the surface of furniture while
providing the appropriate friction to hold the
unit in place during push-button operation.
considering the future
The combination of fully upgradable software
stored in FLASH memory, the TAGtronic
Communications Bus and a powerful 16-bit
microprocessor means that the T32R is ready
for many advances in radio broadcasting
technology today, tomorrow and well into the
future.
*LASER*-T32R Manual v3.7x 8/29/02 12:13 PM Page 12
