fuses
cleaning
There is a fuse in the power socket on the back of your CDT20R.
To change the fuse, unplug the power cable and pull out the fuse
carrier drawer
(1)
.
The fuse carrier contains a spare fuse; this is the first one that you
see when you open the carrier.
There are no other user-serviceable parts inside the CDT20R.
In order to maintain the appearance of your CDT20R, you can
clean it as follows:
before cleaning, always disconnect your CDT20R from the AC
supply.
any grease or dirt on the case may be removed with a soft,
lint-free cloth moistened slightly with a mild solution of warm
water and detergent or washing-up liquid. Do not use any
other solutions. Do not use any solvents or abrasives.
take great care not to get any liquid inside the case.
If this happens, you should have your CDT20R serviced.
28
care and maintenance
care and maintenance
29
service
The only service you should do to your CDT20R is described on
the left. All other servicing should only be carried out by one of
our authorised service agents.
If service is required, please contact your authorised TAG
McLaren Audio retailer. If your CDT20R is still under guarantee,
please refer to the guarantee card which gives you details on
how to claim against the guarantee.
Please keep the original packaging and use it whenever your
CDT20R is transported.
1. You cannot open the fuse carrier drawer while the plug is in the socket
GRA00046.1-[CA]CDT20R 13/03/01 09:54 Page 29
