3. Press the microSD card in and release it. The card springs out.
4. Grasp the microSD card and remove it from the slot.
5. Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on
page 26.
Using the Digitizer
Following the information below when using a digitizer:
■
Use only the included digitizer to touch the screen. Do not place any objects on its surface and
do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,
nails, pencils and ball point pens).
■
Use the digitizer only for touching the screen. Using it for any other purpose may damage the
digitizer and result in scratches on the screen.
■
The digitizer uses electromagnetic induction and may not work properly near strong electrical
field or magnetic field such as:
■
Near AM radio base stations or relay station antennas
■
Near CRT displays that generate strong electromagnetic field noise Move the digitizer away
from such locations so it works properly.
■
The pointer cannot follow the digitizer movement if you move the digitizer too quickly.
To make a selection, tap the screen once with the digitizer. To double-click, tap twice without pausing.
To do a right-click, tap the screen once and hold the tip of the digitizer on the screen, the right-click
icon appears. Press the click button is the same as a right click.
Figure 21. Removing the MicroSD Card
TAG GD3030
Page 23 of 51