background image

4.  Verification of the password is required. Tap the same password again and tap 

Enter

 to 

     confirm the new password.
5.  Navigate to 

APP Menu > Exit

.

6.  Tap 

Exit Saving Changes

 to display the confirmation screen.

7.  Tap 

Yes

 to save the new configuration settings.

After setting the Supervisor password, the password is required to access the BIOS Setup Utility.

Changing a Supervisor Password

1.  Navigate to 

APP Menu > Security > Account’s Password Status

.

2.  Tap the 

Enter

 icon next to 

Setup Supervisor Password

.

3.  Enter the current supervisor password.
4.  Enter a new password.
5.  Enter the new password again to confirm.
6.  Go to 

APP Menu > Exit

.

7.  Tap 

Exit Saving Changes

 and tap 

Yes

 to save the configuration.

Resetting a Supervisor Password

A supervisor password can not be reset. In the event that you forget the supervisory 
password, you will need to reflash the BIOS to enter the BIOS menus. Refer to “Updating 
BIOS” on page 43 to reflash the BIOS.

Figure 57. Exit Screen

 TAG GD3030 

 

 

 

 

 

 

 

 

 

          Page 42 of 51

Summary of Contents for GD3030
























































Reviews: