Safety
To prevent injury and damage, read the following safety guidelines prior to operating the device. The
manufacturer assumes no liability for any and all damages arising from misuse or noncompliance with
these guidelines.
Electrical Hazards
Cleaning/Servicing: Power Off the TAG GD3030
■
Disconnect the TAG GD3030 from power before cleaning or servicing it.
Power Adapter
Contact an authorized service personnel for repairs to the power pack. In the event of a blown fuse
after replacing the fuse, contact an authorized service personnel to avoid electrical shock.
Use only Supplied Power Cables
TAG Global Systems power cables meet industrial requirements for low-temperature flexibility, UV
resistance, and oil resistance. Use only supplied power cables from TAG Global Systems.
If other power cables are used, the following may apply:
■
The operator is solely responsible for the resulting damage;
■
All TAG Global Systems warranties are void.
Environmental Hazards
Do not use the TAG GD3030 in locations near/with flammable gases or vapor. The use of electrical
equipment in explosive environments can be dangerous.
■
Turn off the device when near a gas station, fuel depot, chemical plant or a place where
blasting operations take place.
Environmental
Ambient Temperature
The TAG GD3030 operates on the basis of a passive cooling concept which internal waste heat is
released via the housing surface and requires fresh airflow in the environment.
■
Operating the TAG GD3030 with no fresh cooling air may cause overheating and damage to
the device.
■
The operating environment should not be enclosed to prevent the cool air being heated by the
heat waste from the device.
Connecting and Disconnecting External Devices
To prevent the considerable damage, the TAG GD3030 and the external device should be
disconnected from power when connecting/disconnecting excluding USB devices.
Only Use Authorized Accessories
Only use the supplied cables, power packs and other accessories that have been tested and
approved by TAG Global Systems. Contact your local distributor for further information.
TAG
GD3030
Page
3
of
51
