Removing from the Desktop Dock
1. Power off the TAG GD700. See “Powering Off the Device” on page 20.
2. Disconnect the cabling from the desktop dock.
3. Remove the TAG GD700 from the desktop dock.
Using the Stylus
Following the information below when using a stylus:
■
Use only the included stylus to touch the screen. Do not place any objects on its surface and
do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,
nails, pencils and ball point pens).
■
Use the stylus only for touching the screen. Using it for any other purpose may damage the
stylus and result in scratches on the screen.
■
The pointer cannot follow the stylus movement if you move the stylus too quickly.
To make a selection, tap the screen once with the stylus. To double-click, tap twice without
pausing. To do a long click, tap the screen and hold it for a few seconds.
Figure 32. Removing the TAG GD700
TAG GD700
Page 30 of 68