3. Pull the strap end through the loop and insert the post through the slit on the strap.
4. Secure the strap by attaching the two velcro ends together.
5. Repeat for the remaining strap end.
Removing the Carrying Handle
1. Remove the strap from the velcro and securing post.
2. Pull the strap through the metal loop on the bumper.
3. Repeat from the remaining strap end.
4. Remove the carrying handle.
Figure 51. Securing the Strap
Figure 52. Removing the Strap
Figure 53. Removing the Carrying Handle
TAG GD700
Page 41 of 68
