STEP 14
: Drill
holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
STEP 14
: Drill
holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
D
V2
D
Top view
step 5: Detail 1
Secure
corners of
Vertical Bars
4
Tighten
Horizontal
Bars
5
Mark ONLY
top right
corner
6
STEP 8
: Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
Top view
STEP 8
: Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
Top view
B
H
A
STEP 11
: Locate frame on wall, mark hole drilling location to wall and drill
hole using 1/2`` drill bit.
STEP 11
: Locate frame on wall, mark hole drilling location to wall and drill
hole using 1/2`` drill bit.
I
D
x1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
D
V2
D
Top view
step 5: Detail 1
D
V2
D
Top view
step 5: Detail 1
STEP 11
: Locate frame on wall, mark hole drilling location to wall and drill
hole using 1/2`` drill bit.
WALL ( )
WALL
L
L
H
H
B
B
L
L
If installing on partition replace
F
with #8 wood screw
STEP 14
: Drill
holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
ASSEMBLY & WALL INSTALLATION
PART C:
Page 3
E
F
D
L
L
L
