PA-223A-140 User’s Manual
5
PA-223A-140 User’s Manual
4
VOLUME CONTROLS
PA-223 is equipped with 4 independent volume controls:
MIC1, MIC2, Line1, Line2.
OUTPUTS
AMPLIFIER 2 x 70 W RMS
Output 2 x 70 W on 4 pole Speakon plug. Cable 1- et 1+
2 balanced XLR outputs (3 pole connector) right and left.
1 Changeover switch Mono/Stereo : Allows to switch the Line output before or after the volume
control.
Post: The level of the output depends on the volume control.
Pré: The level of the line output is not modifiable.
1 REC OUTPUT stereo equipped with 2 dual RCA connectors, allowing to connect auxiliary pro-
duct and to register for example a speech.
BASIC EQUIPMENT
BASIC EQUIPMENT
POWER SUPPLY INPUT
AC 110/220 power supply input. Allows working on AC main. It is recommended to use
the provided cable.
ON/OFF BUTTON
Use this button to switch on/off the device.
PREAMPLIFIER
automatic mixer stereo 2 x 70 W RMS / 4 ohms
INPUTS
2 MIC INPUTS equipped with XLR(3 pins) connectors. The balanced inputs allow use of long
cables. One condition: use high quality cables.
2 LINE INPUTS equipped with 2 dual RCA connectors, allowing to connect auxiliary product such
as tuner, CD or Tape player. If all 4 inputs are connected, you can use them simultaneously. Every
input has its own volume control.
TONE ADJUSTMENT
PA-223 is equipped with 3 highly performing tone adjustments.
Bass, Mid, treble : +/- 12 dB efficiency
INPUTS
Line 1
Mic 1
Line 2
Mic 2
MIN
MAX
Bass
MIN
MAX
Mid
MIN
MAX
Hi
MIN
MAX
Mic 1
MIN
MAX
Mic 2
MIN
MAX
Line 1
MIN
MAX
Line 2
Right
SPEAKER OUTPUTS
Left
Line Out
Pre / Post
Master
Mono / St
OUTPUTS
Line R
Line L
Rec Out
