STEP 3
Remove cable (34) from selector shaft (26), remove 2 pan head Allen bolt M10x25 (69), 2 spring washer
(81) and 2 flat washers (82) from guide-rod (23). Incline the guide-rod (23), as shown in the drawing above and
then, remove the combination top weight stack (24) and selector shaft (26). Make sure the shock absorber rubber
and the weight lift are in the right position as shown the drawing. Then put 19 weight stacks (25) to the guide-rod
(23), insert back the combination of the top weight stack (24) and selector shaft (23). Assemble the guide-rod(23)
to the tower frame(1) using 2 spring washer(81), 2 flat washers(82) and 2pan head Allen bolts M10x25(69).
Connect the cable (34) to the selector shaft (26), using the right tools tighten properly bolts and nuts.
Nº
English description
Qty
1
TOWER FRAME
1
23
GUIDE-ROD
2
24
TOP WEIGHT STACK
1
25
WEIGHT STACK
19
26
SELECTOR SHAFT
1
34
CABLE
1
36
WEIGHT SELECTOR PIN
1
69
PAN HEAD, ALLEN BOLT M10x25
2
81
SPRING WASHER
2
82
FLAT WASHER
2
1
69
81
82
69
81
82
23
23
26
24
25
36
34
