background image

6

Unpacking the subwoofer

Place the carton with the subwoofer on the floor in the upside down position and open it

 

from the bottom, remove the internal packaging which protects the subwoofer on the bottom.

Carefully turn the carton with the subwoofer upside down. When the subwoofer is securely placed 

on the floor remove the carton and internal packaging - your subwoofer is ready for placement

 

in your room.

Placement

The placement of the subwoofer in the room is not so critical as for speakers but there are general 

guidelines as shown below:

Placing the subwoofer 

in the center of the room 

usually gives less bass 

but with better 

precision and definition.

Placing the subwoofer near 

the walls usually gives more 

bass with quite good preci-

sion and definition.

Placing the subwoofer in the 

corners usually gives much 

amount of bass but with 

less precision and definition.

Note!

 If it is possible we recommend to place the subwoofer between the front speakers close to 

the wall for better integration with your sound system.

 

Note! 

Final placement depends on your sound system, room acoustics and space, and your 

listening preferences.

Summary of Contents for Platinum v.3 Series














Reviews: