Operation
VOLUME regulator:
Using the Volume Regulator you can adjust the sound volume from minimum (the knob – max counterclockwise) to maximum (the knob – max clockwise).
TREBLE regulator:
You can adjust treble output of the amplifier. The default: the knob is in the center position: the marker on the knob in the vertical position.
Turn the knob counterclockwise (-) to decrease the amount of high frequencies.
Turn the knob clockwise to increase the amount of high frequencies (+).
BASS regulator:
You can adjust bass output of the amplifier. The default: the knob is in the center position: the marker on the knob in the vertical position.
Turn the knob counterclockwise (-) to decrease the amount of low frequencies.
Turn the knob clockwise (+) to increase the amount of low frequencies (+).
1. Connect the Power Adapter to the amplifier and plug the Power Cable into the electrical outlet.
2. Turn on the amplifier – slide the Power Switch to the ON position.
The Power LED Indicator will turn on.
If it does not, it means that the amplifier is working under an abnormal condition (a protection mode) – turn off the power, unplug the Power Cable and check
whether some of the cables are not short circuited.
After fixing the cables turn the amplifier on.
3. Turn on your audio source and start playback.
4. Regulate volume on the amplifier to adjust the level of sound.
Note!
Check “Additional Information” for other useful operating instructions.
Using the BASS / TREBLE regulators at high volume levels may damage this amplifier and / or speakers. This may void your warranty.
Distortion and sound quality worsening may occur when the knob is in the maximum position. It may damage the amplifier and / or speakers.
This may void your warranty.
High volume levels may damage this amplifier and / or speakers.
This may void your warranty.
Preamplifier Output connection (PRE OUT):
This amplifier is equipped with the preamplifier output, which allows connecting amplification or recording equipment such as a power amplifier, powered spe-
akers, active subwoofer or a CD recorder.
The audio signal from the preamplifier of this device is directed to the PRE OUT and its level is variable controlled by the Volume Regulator.
All sound adjustments (Bass / Treble) will affect the sound transmitted to the PRE OUT. The output to the SPEAKERS OUT is still active and it works simulta-
neously with the PRE OUT.
LIMITER:
ON: Limiter is active. It prevents clipping of the amplifier. It is used to dynamically bring the levels of the loud audio signal parts down.
OFF: Limiter is inactive.
9