Taga Harmony TCD-50, Instruction Manual

Operation 

Plug the Power Cable to the CD Player and into the electrical outlet.

Switching ON / OFF

When you connect the CD Player to the electrical outlet for the first time, it will be in the 

Standby mode. The Standby LED Indicator will be illuminated.

ON

• Press the   

Standby

 button to switch the CD Player on. 

  The Standby LED Indicator will switch off.

• If there is no CD disc inserted, the info [NO DISC] will be shown on the display after a 

  while.

• If there is a CD disc inserted, the info about the CD disc [Number of tracks – Total 

  time] will be shown on the display after a while.

Note!

 This CD Player reads only CD-Audio discs. Other formats are not supported. 

Playable media: CD, CD-R, CD-RW. Non-finalized discs cannot be played. 

CD-Audio discs exceeding capacity of 74 minutes may not be played correctly 

(especially last tracks).

OFF

• Press the   

Standby

 button to switch the CD Player off. 

  The Standby LED Indicator will be illuminated.

• The Display will be switched off.

9

Some internal circuits of the device are powered even in the standby mode. 

When you plan leaving home or going away for longer disconnect the power 

cable from the device.

CD Discs Playing

1. Press the   button to open the disc tray and place the CD disc on it (with the printed  

    side up).

2. Press the   button to close the disc tray, after the CD disc is read correctly, info  

    about the disc [Number of tracks – Total time] will be shown on the Display.

    Note!

 When the disc tray is open, please press the   button to close it and start    

    playing the disc automatically.

3. Press the   to start playing. 

4. Press the   to temporarily stop the playing – the info on the display will be blinking. 

    Press the button again, it will continue to play.

5. Press the   button to stop the disc playing.

Do not place any foreign objects on the disc tray. 

Do not push the disc tray in by hand when the CD Player is switched off.

This may damage this device.

Skip to Track

• During playback: press the   /   buttons once or more to skip to the previous / next 

  track on the disc.

• During stop: press the   /   buttons to choose the track you want to start playing 

  with. The playback will start automatically after a while.

• During pause: press the   /   buttons to choose the track you want to start playing 

  with. Press the   to start playing.