Taga Harmony TCD-50, Instruction Manual

Operation

10

Search

During playback: press and hold the   /   buttons to search for the position that you 

intend to continue playing.

Release to resume normal play.

Repeat A-B

This function allows to constantly play the content between two selected points: A 

[start] to B [end].

• During playback: press the 

A-B

 button to select the start point and press it again to 

  select the end point. 

  The info [A -b - Repeat time] will be shown on the display.

  Note!

 You can pause and resume playing using the   button. 

• Press the 

A-B

 button again or one of the following buttons (  /   ,   /   ,   ,  ) to 

  disactivate this function. 

Note!

 During pause: pressing the 

A-B

 button will resume playing and set the start point 

(A) from the point where the playback was previously paused.

Repeat Play

Switching between ALL-track repeat and ONE-track repeat. 

The function may be only activated during the playback or pause.

• First press: to repeat the all tracks. 

  The info [R ALL] will be periodically displayed on the display.

• Second press: to repeat the current track. 

  The info [R ONE] will be periodically displayed on the display.

• Third press or the   button: disactivates this function. 

  The info [R OFF] will be displayed on the display for a while.

Note!

 When a single track is repeated, press the   /   buttons, to skip to the previous 

/ next track on the disc – the selected track will be repeated. 

Direct Track Selection

The 

0-9

 buttons allow to select a specific track on the CD disc.

For instance: to select track number 12, press 1 and then 2 buttons etc.

• During playback: press the 

0-9

 buttons to start playing from the selected track.

• During stop and pause: press the 

0-9

 buttons to start playing from the selected track. 

  The playback will start automatically after a while.

Time Display

Time display switching function.

NO PLAYING (STOPPED): [Total number of tracks on the CD disc - Total CD disc time]

PLAYING or PAUSED 

The track number or [A-b] (if this function is selected), is displayed in the first position.

Each 

TIME

 button press is switching between [Elapsed track (or A-b) time] -> [Rema-

ining track (or A-b) time] -> [Remaining total CD disc time]

Note! 

The time displayed on this unit may differ from the actual time, as it is calculated 

by rounding.