Taga Harmony TCD-50, Instruction Manual

3

Safety Instructions

IMPORTANT

READ THIS SECTION CAREFULLY BEFORE PROCEEDING!

WARNING:

 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS FILLED WITH 

LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.

CAUTION:

 TO PREVENT ELECTRIC SHOCK, FULLY AND SECURELY INSERT 

THE POWER CABLE PLUG INTO THE POWER OUTLET, AND POWER CABLE 

CONNECTOR INTO THE UNIT SOCKET (IF THIS UNIT IS NOT EQUIPPED WITH AN 

INTEGRATED [ATTACHED] POWER CORD).

CAUTION: 

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE 

THE FUSE (IF THE UNIT IS EQUIPPED WITH A USER REPLACEABLE FUSE) ONLY 

WITH THE SAME AMPERAGE AND VOLTAGE TYPE. IN CASE WHEN THE UNIT IS 

NOT EQUIPPED WITH A USER REPLACEABLE FUSE - REFER REPLACEMENT TO 

QUALIFIED SERVICE PERSONNEL.

WARNING:

 THE UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE 

VENTILATION TO ALLOW FOR COOLING. DO NOT PLACE THE UNIT NEAR 

A HEAT SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

An exclamation mark in a triangle is intended to alert the user to the presence 

of important operating and maintenance (servicing) instructions in the literature 

accompanying the appliance.

The triangle containing a lightning symbol is intended to alert the user to the presence 

of uninsulated dangerous voltages within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric shock to persons. 

EN_safety_02-20_1

TCD-50

Class 1 Laser Product

•  This unit utilises a laser. Use of controls, adjustments or performance of procedures 

other than those specified herein may result in hazardous radiation exposure.

•   Before moving the unit, ensure the disc tray is empty.

•   Always remove the disc when the unit is not in use.

•   Failure to do so will risk severely damaging the disc and the unit.

•   Do not stack devices, heat from other devices may affect the performance of the 

unit.