Taga Harmony TCD-50, Instruction Manual

4

Safety Instructions

1.  Read Instructions  - All the safety and operating instructions 

should be read before the product is operated.

2.  Retain Instructions - The safety and operating instructions should 

be retained for future reference.

3.  Heed Warnings - All warnings on the product and in the operating 

instructions should be adhered to.

4.  Follow Instructions - All operating and use instructions should 

be followed.

5.  Cleaning - Unplug this product from the power outlet before 

cleaning. Do not use liquid cleaners or aerosol cleaners.

6.  Water and Moisture - Do not use this product near water - for 

example, near a bath tub, wash bowl, kitchen sink or laundry tub; 

in a wet basement; or near a swimming pool; and the like. These 

precautions also apply to the power cord.

7.  Accessories - Do not place this product on an unstable cart, 

stand, tripod, bracket or table. The product may fall, causing seri-

ous injury to a child or adult and serious damage to the product. 

Use only with a cart, stand, tripod, bracket or table recommended 

by the manufacturer or sold with the product. Any mounting of 

the product should follow manufacturer’s instructions and should 

use a mounting accessory recommended by the manufacturer.

8.  Ventilation - This unit may be equipped with slots and openings 

in the cabinet (housing) which are provided for ventilation and 

to ensure reliable operation of the product and to protect it from 

overheating and these openings must not be blocked or covered. 

The openings should never be blocked by placing the product 

on a bed, sofa, rug or other similar surface. This product should 

be not placed in a built-in installation such as a bookcase or 

rack unless proper ventilation is provided or the manufacturer’s 

instructions have been adhered to. For products equipped with a 

separate power supply unit, leave at least 5cm (2in.) of free space 

on all sides and the top of the power supply.

9.  Power Sources - This product should be operated only from the 

type of power source indicated on the marking label (placed on 

the product and/or, if applicable, on a separate power supply 

unit). If you are not sure of the type of power supply in your home, 

consult your product dealer or local power company. For products 

intended to operate from battery power or other sources, refer to 

the operating instructions.

10.  Grounding and Polarity - some units for proper operation or 

to take full advantage of their capabilities may require to be 

connected to a grounded power outlet – refer to the user manual 

for more information. 

Some units may have markings for the live (L) and neutral (N) 

conductors for power - in order to take full advantage of capa-

bilities of such products, it is recommended to properly connect 

the polarity according to the markings on the unit - refer to the 

user manual for more information. Connecting the polarity not in 

accordance with the markings will not affect the durability and 

reliability of the device.

11.  Power-cord Protection - Power supply cords should be routed

      so that they are not likely to be walked on or pinched by items

      placed upon or against them, paying particular attention to cords

      at plugs, convenience receptacles and the point where they exit

      from the product.

12.  Lighting - For added protection for this product during a lighting 

storm or when it is left unattended and unused for long periods 

of time, unplug it from the wall outlet and disconnect the antenna 

or system cables. This will prevent damage to the product due to 

lighting and power-line surges.

13.  Overloading - Do not overload wall outlets, extension cords or 

integral convenience receptacles as this can result in a risk of fire 

or electric shock.

14.  Object and Liquid Entry - Never push objects of any kind into this 

product through openings as they may touch dangerous voltage 

points or short-out parts that could result in a fire or electric 

shock. Do not expose this apparatus to dripping or splashing and 

ensure that no objects filled with water, such as vases are placed 

on the apparatus.

15.  Servicing - Do not attempt to service this product yourself as 

opening or removing covers may expose you to dangerous 

voltage or other hazards. Refer all servicing to qualified service 

personnel.

16.  Damage Requiring Service - Unplug this product from wall outlet 

and refer servicing to qualified personnel under the following 

conditions:

•  when power supply cord or plug is damaged;

•  if liquid has been spilled or objects have fallen into the product;

•  if the product does not operate normally by following the oper-

ating instructions. Adjust only those controls that are covered by 

the operating instructions as an improper adjustment of other 

controls may result in damage and will require extensive work 

by a qualified technician to restore the product to its normal 

operation;

•  if the product has been dropped or damaged in any way;

•  if the product exhibits a distinct change in performance - this 

indicates a need for a service.

17.   Replacement Parts -  when replacement parts are required, be 

sure the technician has used replacement parts specified by the 

manufacturer or with the same characteristics as the original 

part. Unauthorized substitutions may result in fire, electric shock 

or other hazards.

18.  Safety Check - Upon completion of any service or repairs to this 

product, ask the service technician to perform safety check to 

determine that the products is in proper operating condition.

19.  Wall of ceiling mounting - The product should be mounted to a 

wall or ceiling only as recommended by the manufacturer.

20. Heat - The product should be situated away from heat sources 

such as radiators, heat registers, stoves or other products (includ-

ing amplifiers) that produce heat.

21.  [Refer to products equipped with vacuum tubes] Tube Cage or 

cover - For your safety and to protect the vacuum tubes this 

product may be equipped with the factory installed vacuum tube 

cage or cover. 

It is not recommended to remove the cage or cover unless it is 

required to change the vacuum tubes. 

When the cage or cover is removed - do not touch the vacuum 

tubes - they may be hot and burn the skin!

22. Operating Environment - Operating environment temperature and 

humidity of the unit: +5°C to +35°C (+41°F to +95°F); less than 

85% RH (cooling slots not blocked).

EN_safety_10-21