background image

5

Use the remote controller by aiming it at the remote controller sensor.

The remote controller can operate in the maximum range of 5 meters away from 

the amplifier and within 30 degrees from the axis of the controller sensor.

Note!

 Exposing the remote controller sensor to direct sunlight or strong light may cause 

faulty operation.

Remote Controller Sensor

Remote Controller

Remote Controller 

Battery Installation

 

1.  Prepare two AAA batteries (not provided with this product).

2.  Remove the rear cover.

3.  Insert the batteries into the battery compartment. Carefully follow the polarity 

diagram inside the battery compartment ( po and negative - symbols).

4.  Reinstall the rear cover.

Operating Range

5m

•  Always use AAA batteries and do not use the rechargeable batteries.

•  Do not mix new batteries with old batteries or different kinds of batte-

ries.

•  If the batteries run out, remove the old batteries and replace them 

with new ones within several minutes.

•  If the batteries are placed incorrectly, they can cause explosion.

•  Remove the batteries if the remote control is not used for a long 

period of time.

•  Do not handle and store the batteries together with metallic tools.

Summary of Contents for TCD-50

















Reviews: