USER’S MANUAL
Product Overview
Thank you so much for buying TAGG Power Bass-400 Wireless
Headphone. Our main goal is to please you with superior
sound quality and comfort combined with convenience
of hands free operation. Here is some useful piece of information
that will help you operate this headset properly.
On/Off Button
Volume Controller
LED Indicator
AUX-In
Port
Micro USB
Port
Built-in
Microphone
Headphone Controls
1
2
3
4
5
6
FUNCTION
OPERATION
Power On
Long Press the HOME for 3 secs
Power Off
Long Press the HOME for 3 secs
In Pairing Mode
Blue and Red LED will start Blinking
Blue LED will Blink
Short Press the POWER Button
Short Press the POWER Button
Long Press the Volume “ <” & “>”
Press the “<” & “>” Button
Press the “<” & “>” button while on Call
When Connected
Answer Call
End Calls
Change Track
Volume “+” & “-”
Mic Volume
Connecting with your Device:
Keep your Bluetooth Device with in 3 Ft. while Pairing.
Press the Power button of TAGG PowerBass-400 headphone for 3 secs.
Blue and Red LED will blink and it means that the headset is in
the pairing mode.
Now search for Available bluetooth devices in your
Mobile/Laptop/iPad and select TAGG PowerBass-400 from the list of
available devices.
If prompted, enter password or PIN required “0000”.
If prompted by your mobile phone to connect, click “YES”.
After Successfully connecting Blue LED will flash twice after
every 4 secs.
How to Charge:
Connect to power using Micro USB.
To better protect the battery life, kindly use only the charging
cable provided with the headset < 5V, 100 mAH-240 mAH.
Allow 1-2 hours to completely charge the headset.
LED Indications:
While Charging - Red LED is On.
When completely charged - Blue LED is On.
When battery is low, Red LED blinks twice after every 4 seconds
and the voice prompt will let you know that battery status.
Pairing Mode- Blue and Red LED starts Flashing.
Reconnect the Headphone:
If the connection is lost, TAGG PowerBass-400 will try to reconnect
automatically.
If it does not reconnect, kindly press the Power button for 3 secs
and reconnect manually through your mobile Bluetooth.
Common Problems and Solution:
Mobile Can’t Find the Headphone:
Kindly restart your phone and the Headphone.
There’s always noise and the Bluetooth keeps
disconnecting:
The Headphone needs to be charged.
Make sure you are not beyond the signal distance.
PowerBass-400
