4
Tahoe 8216 / Tahoe 8116 Remote Power Management System
Installation
Before installation carefully read and follow the Safety Instructions.
Reliable earthing of this equipment must be maintained.
Th
is product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that
a fuse no larger than 240 VAC, 16A is used.
Mounting
1. Position the device in the rack and align the holes in the mounting brackets with the holes in
the rack.
2. Tighten the device to the rack using four screws.
3. Install the power cord retention bracket.
4. Attach the power cord and lock the retention bracket.