11
Tahoe 8216 / Tahoe 8116 Remote Power Management System
off 1:*
- turns o
ff
all outlets on main unit,
on 5 2:2,3
- turns on
fift
h outlet on main unit as well as second and third outlets on
second unit.
Th
e
end
command is useful if the service operator appends some text to messages. It preserves from
an error occurrence in such a situation and should be placed a
ft
er all commands to be executed and
followed by a semicolon or newline.
Th
e following text is then ignored.
Commands must be separated with a semicolon (’
;
’) or newline character.
A
ft
er a message is received, the device replies with a status message of the form:
Tahoe RPMU: <
n
> of <
m
> succeeded.
Where
n
is the number of commands successfully executed and
m
is the total number of commands
found in the message.
Serial Console
Th
e serial console gives access to the command line interface. Use a null modem cable to connect
to the device through the serial console port. Port speed is 9600bps with one stop bit, 8 data bits
and no parity, no
fl
ow control. See the
Command Line Interface
section for the list of available com-
mands.
Command Line Interface
Th
e Command line interface gives full access to all device settings and is available through telnet
and the SSH connection as well as the serial console port.
Complete command set
?
displays the command list/context sensitive help
arp
ARP table con
fi
guration
con
fi
g
displays current con
fi
guration
console
console access settings
eepromdump
dumps EEPROM (con
fi
guration memory) contents
erasecon
fi
g
erases whole con
fi
guration
exit
closes a connection
gsm
GSM settings
help
usage information
