17
Tahoe 8216 / Tahoe 8116 Remote Power Management System
·
watch delay
<
delay
>
– boot delay (60 seconds by default).
You may specify
outlets
as a combination of the following forms:
<
a
>,<
b
>
– speci
fi
c outlets,
<
m
>-<
n
>
– range of outlets,
<
name
>
– outlet by its name,
*
– all outlets,
<
u
>:<
outlets
>
– speci
fi
c outlets on unit u,
e.g:
power off *
– turns o
ff
all outlets (on all units),
power on 1-4
– turns on outlets from 1 to 4 on main unit,
power on 2:1,3
– turns on outlets 1 and 3 on second unit (
fi
rst extension unit),
power off 1:*
– turns o
ff
all outlets on main unit,
power on 5 2:2,3
– turns on
fift
h outlet on main unit as well as second and third out-
lets on second unit.
Using the
power watch
command you may assign an IP address to a speci
fi
c outlet(s). In this case
the outlet is reset if the speci
fi
ed address doesn’t respond to ICMP echo requests.
Th
e echo request
is sent every
interval
seconds. If the
amount
of consecutive echo requests are not replied to, the
outlet reset is performed. A
ft
er boot or reset echo requests are not sent for the
delay
interval. Set the
outlet’s watch address to 0.0.0.0 to disable this function.
prompt
By using the
prompt
command you may change the default
Tahoe>
prompt to any other text that
will help you identify the device.
ps
Shows the processes list.
quit
Th
is command closes the session and disconnects the user from the device.
Th
e same as
exit
.
reboot
Reboots the device.
