20
Tahoe 8216 / Tahoe 8116 Remote Power Management System
Th
en the server is only reachable from the given IP address. To remove the limitation enter 0.0.0.0
as the IP address.
syslog
Th
e device may send messages about its status and important events to a syslog server. To con
fi
gure
syslog logging the following commands may be used:
syslog on
– enables logging,
syslog off
– disables logging,
syslog host
<
IP address
>
– sets the IP address to which the messages will be sent.
tech
Th
e
tech
command displays a detailed report about the device’s internal state.
Th
is output may be
used by the technical support for debugging purposes.
telnet
Th
is command allows limiting telnet access to the device. Access may be enabled or disabled by
entering:
telnet on
or
telnet off
respectively.
Th
e telnet port may be changed with
telnet port
<
port
>
Th
e default port is 23. Moreover, access may be limited to a certain IP address:
telnet host
<
IP address
>
If the IP address is set as 0.0.0.0, then access is possible from anywhere in the network.