1.3.2 Switch operation
To explain menu operation of SDI series Matrix
Switcher, TMX-0808SDI type serves as example. All
SDI series Matrix Switcher can refer to it.
TMX-0808SDI main interface:
Press “MENU” to enter switch menu, including:
1. Switch Video
2. Switch through
* Switch through one channel or all channels.
3. Close
* Close one output or all outputs.
4. Save scene
5. Recall scene
6. Undo
* Undo last switch.
7. Demo Switch
* Switch one by one.
8. Setting
* Setup menu.
9. Status
* Request channel state.
Menu 1 to menu 9 are explained explicitly:
1. Switch Video
Video switch key, switches one input video signal to
any or all output channels.
Example:
Switch Video signal of input channel 1 to
output channel 8
1. Press “MENU” to enter menu;
2. Press “MENU” to enter “Switch Video”;
3. Press “MENU” to select input channel;
4. Press “
Õ
/
Ö
” to adjust input channel as “1”;
5. Press “MENU” to select output channel;
6. Press “
Õ
/
Ö
” to adjust output channel as “8”
；
7. Press “MENU” to confirm and press “EXIT”
twice
.
TMX-0808SDI
Version: 2.10
Switch Video
：
Switch Video
：
0 ——
＞：
1
Switch OK !
Switch Video
：
▋
1 ——
＞：
1
Switch Video
：
1 ——
＞：▋
8
Note
：
)
“Input channel” and “output channel” number
must be less than matrix type. For example:
TMX-08xxSDI series can only input number
1-8.
)
If any menu item is edited, except setup
menu, a key must be pressed within 15
seconds otherwise the system will return to
main menu item automatically and erase the
previous channel setup.
)
To return to main menu press any key if
currently editing user interface is switch finish
interface, display input, output status
interface or DEMO interface. To return to
main menu if editing other user interface
press “EXIT” or “
Õ
”.
TMX-0808SDI
Version: 2.10
Note
：
)
If input channel displays “0”, output channel is
closed.
)
If output channel displays “ALL”, input channel
is switched to all output channels.
7
