background image

23

● Use each test strip immediately after removing it from the vial.
● Write the opening date on the vial label when you first opened

  it. Discard remaining test strips after 6 months.

● Do not use test strips beyond the expiry date. This may cause

  inaccurate results.

● Do not bend, cut, or alter a test strip in any way.
● Keep the strip vial away from children since the cap and the test

  strip may be a choking hazard. If swallowed, promptly see a doctor
  for help.

For further information, please refer to the test strip package insert.

Important Control Solution Information

● Use only our control solutions with your meter.
● Do not use the control solution beyond the expiry date or 3 months  

  after first opening. Write the opening date on the control solution  
  vial and discard the remaining solution after 3 months.

● It is recommended that the control solution test be done at room   
  temperature 20°C to 25°C (68°F to 77°F). Make sure your control  

  solution, meter, and test strips are at this specified temperature    
  range before testing. 

● Shake the vial before use, discard the first drop of control solution,  

  and wipe off the dispenser tip to ensure a pure sample and an    
  accurate result.

● Store the control solution tightly closed at temperatures between  
  2°C to 30°C (35.6°F to 86°F). Do 

NOT

 freeze.

Result Readings

SYSTEM TROUBLESHOOTING

If you follow the recommended action but the problem persists, please 
call your local customer service. 

Summary of Contents for PLUS One





























Reviews: