Setting the Meter
Before using your meter for the first time or if you change the meter battery,
you should check and update these settings. Make sure you complete the
steps below and have your desired settings saved.
Entering the Setting Mode
Start with the meter off (no test strip inserted). Press SET located on the back
to turn on the meter.
1. Setting the Date
With the year flashing, press
Main Button
until the correct
year appears. Press SET.
With the month flashing, press
Main Button
until the correct
month appears. Press SET.
With the day flashing, press
Main Button
until the correct
day appears. Press SET.
2. Setting the time format
Press and release
Main button
to select the desired time format --- 12h or
24h. Press SET.
3. Setting the time
With the hour flashing, press
Main Button
until the correct
hour appears. Press SET.
With the minute flashing, press
Main Button
until the correct
minute appears. Press SET.
