Taifun® GT III – User Manual
english
9
Filling the tank
To fill the Taifun® GT III, first close the liquid control. Turn
the drip tip until the liquid control openings are completely
closed.
The liquid flow is now interrupted and you can unscrew the
top cap to fill the tank.
Important:
The drip tip should be pulled up a little bit
before loosening the top cap, as otherwise the liquid
control could be adjusted further when loosening the top
cap.
After unscrewing the top cap, the liquid can be filled into
the tank via the side openings.
Important:
After filling, the tank should be immediately
closed again with the top cap. The tank should only be
opened as short as necessary.
