Taifun® LTB
–
User Manual
english
27
(Re-)filling of the atomizers
Activate key-lock / remove atomizer
Before filling, the keylock of the selected atomizer has to be
activated.
If you want to fill more atomizers at once, it is
recommended to turn the Taifun® LTB off.
You must unscrew the entire atomizer to refill it.
(Re-)Filling
Hold the atomizer upside down and unscrew the tank. Now
the selected liquid can be filled into the tank. Screw the
tank back on, while still holding the atomizer upside down.
IMPORTANT:
Do not overfill. The capacity of each tank is about 5 ml.
Visual controll of the chambers
Before you screw the atomizer back on the device, you
should inspect the chambers. If there is leaked liquid in the
chamber, it hast to be removed and the chamber has to be
cleaned.
(See: cleaning)
IMPORTANT:
If leaked liquid enters the air pipe, a cleaning by the
manufacturer will become necessary.
Inserting the atomizers / deactivate key-lock
If the chamber is clean, the atomizer can be screwed onto
the device.
After the key lock is deactivated or the Taifun® LTB is turned
back on, the steam process can be started as usual.