4-2
4.2 Transportation
4.2.1 The diagram of the machine weight and its gravity center
The weight differ due to the different models. Their data is as blow:
MODEL TPR-1230
TPR-1230H
TPR-1600H TPR-2000H
Total Weight
2300 kgw
2300kgw
5100kgw 6600kgw
Required Forklift
2.5 tons
2.5 tons
5 tons
7 tons
Note:
Please make sure that the forklift tonnage is suitable for the machine.
The above arrow pointed place is the machine’s gravity center. It is about 200 mm far from
the Column, measured from the middle of the wooden crate.
4.2.2 The movement of the machine.
There are using forklift to move the machine.
The following is the procedure, precaution and illustration for moving the machine with
forklift.
a.
Have a suitable forklift move to the wooden crate.
b.
As diagram shown, insert two forks into the underneath of the
wooden crate.
c.
Adjust the distance from the forks to the gravity center till L1
is equal to L2. (L1 & L2=450mm)
d.
Have forks fully inserted into the underneath of the wooden
crate.
e.
Have the machine fastened to the forks and forklift, using
metal chain or wire.
Precaution
：
a.
Forks must be fully inserted.
b.
L1 must be equal to L2 so that the machine can be in balance.
Summary of Contents for TPR1230
