CNC-210A Series H6681 User manual
Page
3
of
20
έᚊཝҋજ̼ѣࢨ̳Φ
TAILY AUTOMATION CO.,LTD.
3. FRONT PANEL DESCRIPTION
3.1. Power
switch
Power supplier equipped, controls the AC power to the controller.
3.2. Key
pads
~
：
10 key, for entering numerical values.
：
Enter into EDIT mode.
：
Specify target production quantity.
：
Specify starting step in memory.
：
Specify ending step in memory.
：
Select parameter to be programmed, or to switch display mode.
：
Select guiding direction for each step.
：
Select winding direction for each step.
：
To specify whether to suspend winding, during the guiding traverse moving to the edge of
the width.
：
Select whether to have auto-positioning function for each step.
：
Select whether to have auto-starting function for each step.
：
Reduce step number by one, or reduce PIECE COUNTER by one.
：
During programming, clear current data to zero.
：
Copy the data of previous step into current step.
：
Write data into memory.
：
Switch display to shows PIECE COUNT or RPM.
：
Hold down this key for two seconds to reset PIECE COUNTER to zero.
：
To switch between AUTO and NON-AUTO mode.
：
Switch whether brake will be applied to the win spindle during stopping.
：
Skip current step and go to the next step.
：
Discard current step and go to the previous step
：
At any time, discontinues current operation and return to ready mode.
：
Pause during winding.
：
Restart during pause,
or pause during winding.
