- 4 -
TM
６ ． Ｓ Ｔ Ｏ Ｒ Ａ Ｇ Ｅ
If the oil filter is not used immediately, store it with particular attention
paid to the following.
(1) Keep it in a clean and dry room.
(2) If it is stored outdoors or in a humid place, cover it tightly with a vinyl
sheet or equivalent.
７ ． Ｉ Ｎ Ｓ Ｔ Ａ Ｌ Ｌ Ａ Ｔ Ｉ Ｏ Ｎ
Ｃａｕｔｉｏｎ
* Connect pipes oiltight.
* Never mount on or hang from the oil filter, or it may be damaged or
an injury may be suffered.
* Installation, operation, maintenance and checking must be performed
by skilled persons with expertise.
Unqualified persons may cause oil leaks or suffer an injury.
(1) Location and ambient conditions
Location: Indoors (where little dust raises,
water is not splashed on or there are no flammable)
Ambient temperature: 0℃ ～ 80℃
(2) Before connecting pipes, make sure of the locations of oil inlet and outlet.
Be sure that the drain plug of the housing faces down. The flow direction of
oil is arrow marked on the cover. Ascertain that the direction is correct.
(3) Connect pipes to the filter using care so that the housing is not excessively
stressed.
(4) When setting up pipe joints,screw a part of screw on a pipe into the entrance
of body① .
(5) When installing, allow sufficient space for maintenance work in future.
Be sure to provide an element allowance enough to enable easy replacement
below the housing.
８ ． Ｏ Ｐ Ｅ Ｒ Ａ Ｔ Ｉ Ｏ Ｎ
Ｃａｕｔｉｏｎ
* Service pressure (including pressure variations) must not
exceed 21.0MPa{21.0kgf/cm }.
２
Use under any higher pressure may result in a damaged filter.
* The oil filter becomes very hot during operation.
Stay away from it to avoid burns.
Summary of Contents for TM
Page 8: ......
