© Tait Limited April 2013
www.taitradio.com
402-00090-01
T02-00004-0201/T02-00004-0202
Horn Speaker
Installation Instructions
Introduction
The T02-00004-0201 horn speaker (for 25W
radios) and the T02-00004-0202 horn speaker (for
30-50W radios) can be mounted externally on the
vehicle so that radio traffic can be heard when
personnel are outside the vehicle. The horn
speaker is connected to the radio's speaker out
terminals.
The horn speaker is supplied with a 20ft (6m)
extension cable, and a flying lead.
The flying lead is terminated with two
receptacles. The receptacles of the
T02-00004-0201 (for 25W radios) are different
from those for the T02-00004-0202 (for 30-50W
radios). Two spare receptacles are included with
each kit.
Alert Symbol and Message Conventions
Please follow exactly any instruction that appears in the text as an ‘alert’. An alert provides
necessary safety information as well as instruction in the proper use of the product. This
document uses the following types of alert:
Warning
This alert is used when there is a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution
This alert is used when there is a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Notice
This alert is used to highlight information that is required to ensure procedures
are performed correctly. Incorrectly performed procedures could result in equipment
damage or malfunction.
This alert is used to highlight significant information that may be required to ensure pro-
cedures are performed correctly, or draw your attention to ways of doing things that can
improve your efficiency or effectiveness.
receptacles
flying lead
horn
speaker
cable
extension
cable
