4
User Information
User Information
The T2009 power supply enables you to use your Tait T2000 or
Tait TM8000 mobile radio as a desktop radio.
The T2009 is a switched mode power supply. It converts mains
input voltage to regulated 13.8VDC, using pulse width modula-
tion (PWM) control.
The T2009 power supply is protected against short circuits, as
well as over current and over voltage conditions.
Check the Mains Supply Voltage
Before you plug in and turn on your power supply the first time,
please check the mains supply voltage.
The voltage rating of the T2009 is printed on a label on the
bottom of the supply. Verify that it corresponds with your local
mains supply voltage (i.e. 120 VAC or 230 VAC).
The variations in mains supply voltage under which the T2009
can operate, are listed in the “Electrical Specifications” table on
page 17.
Turning the Power Supply on
The T2009 has an illuminated on/off switch, marked “I” for on
and “O” for off. Turn the power supply on by pressing the “I”
side of the switch. The indicator inside the switch will illumi-
nate.
Note:
If the T2009 does not turn on, refer to “Fault Finding
Information” on page 16.
Turning the Power Supply Off
Before you turn the power supply off, turn the radio off as
described in the user documentation for the radio.
To turn the power supply off, press the “O” side of the power
switch.
