50
WAIT - IN QUEUE
The network has not yet contacted the
other party’s radio but your call will be
connected automatically as soon as pos-
sible.
WAIT - RINGING
The network is setting up your call, and
has contacted the other party’s radio.
The display window indicators appear in the second line of the
display to indicate group or emergency call status.
G
(Group) Your radio has received a
group call from another party. Listen
for the message, but you may not need
to reply.
E
(Emergency) Your radio has received
an emergency call from another party.
Listen carefully for the message and be
ready to render all assistance possible.
Answer if appropriate.
Appendix IV Common Dialling
Functions
The following tables provide a key to common dialling code
setups and dialling access to special functions. Where a number
is specified, note that the number itself may be entered di-
rectly, or it may be entered by using an alphanumeric label
(see “Alphanumeric Entry Mode”).
Some of the functions listed below may be unavailable on your
network, and some may need to be enabled during pre-
programming of your radio. For more information about the
facilities available on your network or radio, please refer to
your fleet manager or Tait dealer.
Note:
Your T3040
II
may be preprogrammed so that you can
initiate the call by pressing the PTT key instead of the Enter
(
3
) or Hash (
6
) keys.
Summary of Contents for T3040II
Page 1: ...Operator s Manual T3040II ...
Page 65: ...64 ...